Tired of snow sticking to your shovel? This trick makes clearing your driveway easier

Wet snow is heavy, and it sticks. After a few metres of driveway, a thick layer can build up on your shovel. Every scoop gets heavier, and instead of sliding neatly off the blade, the snow stays put. Most people simply knock the shovel against the kerb and carry on.

But what if there were a way to stop so much snow from sticking in the first place? You might already have the answer sitting in your garden shed, next to the tools and other things you only reach for when something needs fixing.

The surprising use for a familiar household product

The trick involves WD-40, the familiar blue and yellow can usually kept around for squeaky hinges and stiff mechanisms.

The company recommends spraying its original Multi-Use Product on both sides of a snow shovel before you start clearing. The idea is to make the blade slippery enough for snow, ice and slush to slide off more easily, rather than collecting in a heavy layer.

It's also included in WD-40's collection of more than 2,000 unusual uses. The company's list of suggestions includes keeping snow from sticking to shovels and snowploughs, helping with wet, sticky snow and protecting shovels from the effects of road salt.

One detail worth knowing: many of the ideas in that large collection were submitted by users and haven't all been tested or endorsed by the company. However, WD-40 also features the snow-shovel tip in its own winter advice.

How to apply WD-40 to a snow shovel

You don't need to drench the blade. A light coating is all that's needed.

A tutorial on Instructables suggests a simple two-step method:

  1. Spray a light coat over the shovel blade and wipe it clean to remove dirt and residue.
  2. Apply a second light coat and leave it for about a minute to dry before using the shovel.

The effect won't necessarily last throughout a long session. According to Hunker, you may need to reapply the spray after around 30 to 40 minutes of shovelling.

A few things to be careful about

Before trying this, check what your shovel is made from. WD-40 says its Multi-Use Product is suitable for most plastics, but not all. The company advises avoiding polycarbonate and clear polystyrene, so don't assume every plastic blade is suitable.

It's also important to use the aerosol safely. Spray outdoors or in a well-ventilated area, and keep the can away from flames, heaters and sparks. The product is flammable.

Think about where the treated shovel will be used, too. You may not want oily residue ending up on your lawn, flower beds or in areas where children and pets play.

Most importantly, never spray WD-40 directly onto your driveway, path or steps. The aim is to make the shovel blade slippery, not the ground beneath your feet. That could create a slipping hazard.

Once you've finished clearing the snow, wipe down the shovel if necessary and store it somewhere dry. It's a small preparation step before the next snowfall, and it could make a frustrating winter chore a little easier.

Advertising
Adobe Stock